CJP-43 35kV 200A

SKU
CJP-43 35kV 200A
Availability
In stock

The three phase direct buried CJP-43 cable junction pedestal is made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 200/600A 15/25/35kV 2/3/4-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.

Categories: Power Design

Discription

Our three phase direct buried CJP-43 cable junction pedestal with (2) fixed SS parking stands beside each junction mounted on a wide aluminum bar slantwise is available in the following configurations/options;

    • Heights – 41”, 50”, & 56”
    • Top Depth – 32″
    • Top Width – 69″
    • Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
    • Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
    • Lifting  Two lifting nuts  located on both sides of the pedestals allowing it to be lifted the same way as  a single phase transformer is slung.
    • Parking Stands – (8) Fixed SS parking stands – slant gesign
    • Optional Junctions – 2/3/4-Way 200/600A 15/25/35kV
    • Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
    • Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top

Specifications, Certifications & Literature ~ Cable Junctions Pedestals 

Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.

Specifications & Certifications:

Literature:

Have one of our knowledgeable staff contact you
We will get back to you asap
Thanks
Quote