WECS GROUNDING MATERIALS
Contact WECS for all your Grounding Material needs. Let a WECS expert inform you about the three grounding methods: COMPRESSION, EXOTHERMIC & MECHANICAL and the tools needed. Take advantage of our Decades of experience to find the right options to save you time and money.

An irreversible compression ground system which meets the most stringent safety and performance requirements, including those of OSHA and nuclear power plant design. Performance excellence and long life expectancy are the system's basic design guidelines. It is a complete system which consists of connectors for grid cross connections, taps, splices, cable to ground rod, ground plates, and terminations
Inspectability

The compression made by the BURNDY® HYGROUND® tool and die combination also embosses an identification code on the installed connector. This mark allows installers and electrical inspectors to visually—and quickly—confirm the proper connector, tool, and installation die was used as well as ensure the connector has been correctly placed. Since BURNDY® HYGROUND® compression tools are designed to complete the crimp before releasing, you can be further assured of the installation quality.


Compression

Safe and efficient grounding system of cross grid, tap, splice, cable to ground rod, ground plates and termination connectors.


 Exothermic

Simple, portable and efficient method for welding copper to copper and various other materials.


 Mechanical 

Easy to install mechanical connectors, guaranteeing top performance under extreme conditions.

The Installation Tooling

Cable Cutter Tools
Hydraulic Tooling
Mechanical Tools
Pneumatic Tooling & more