CJP-42 15/25kV 600A
The CJP-42 three phase direct buried cable junction pedestal is made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 200/600A 15/25 kV 2/3/4-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Discription
Our three phase direct buried CJP-42 cable junction pedestal with the (4) fixed SS parking stands inline with the junctions is available in the following configurations/options;
-
-
- DESIGN – Direct Buried
- HEIGHTS – 41”, 50”, & 56″
- TOP DEPTH – 32″
- TOP WIDTH – 69″
- SAFETY – Reflective smooth white gel coat interior finish for stickers to adhere to.
- LIFTING – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- STANDARD COLORS – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- PARKING STANDS – (4) Fixed SS parking stands inline with junctions
- OPTIONAL JUNCTIONS – (3) 2/3/4-Way 200/600A, 15/25kV,
- OPTIONAL GROUND BAR – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- OPTIONAL VENTILATION LOUVERS – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
-
Specifications, Certifications & Literature ~ Cable Junctions Pedestals
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications:
Literature: