CJP-40 35kV 600A
Both the three phase direct buried CJP-40 & CJP-41 cable junction pedestal are made with fire retardant fiberglass and protected with UV stabilized gelcoat . Optional 600A 35kV 2/3/4-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Discription
Both our three phase direct buried CJP-40 & CJP-41 cable junction pedestals come with (6) Adj SS parking stands either above (CJP-40) or below (CJP-41) and are available in the following configurations/options;
- Design – Direct Buried
- Heights – 41”, 50”, & 56″
- Top Depth – 32″
- Top Width – 62″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective Smooth White Gelcoat Interior Finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS Parking Stands Above (CJP-40) or below (CJP-41) Junctions
- Optional Junctions – (3) 2/3/4-Way 600A, 35kV Junctions installed on slant
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
Specifications, Certifications & Literature ~ Cable Junctions Pedestals
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications:
Literature: