CJP-35B 35kV 600A
Both our CJP-35/A or CJP-35/B three phase direct buried cable junction pedestal are made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 600/900A 35kV 2/3-Way Cooper junctions with 6″ centers or 2/3/4-Way Elastimold junctions with 4″ centers are also offered. We certify that all Cable Junction Pedestals conforms to IEEE C57-12-28 Padmounted Enclosure Integrity Standard.
Our three phase direct buried CJP-35/A & CJP-35/B cable junction pedestal series that come with parking stands either above (CJP-35/A) or below (CJP-35/B) the junctions are available in the following configurations/options;
- Design – Direct Buried
- Heights – 41”, 50”, & 56″
- Top Depth – 32″
- Top Width – 62″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS parking stands above (CJP-35/A) or below (CJP-35/B) junctions
- Optional Junctions – (3) 2/3-Way 600A, 35kV Cooper with 6″ centers,
- Optional Junctions – (3) 2/3/4-Way 600A, 35kV Elastimold junctions w/4″ centers
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
Specifications, Certifications & Literature ~ Cable Junctions Pedestals
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications: