CJP-35B 35kV 200A
Both the CJP-35/A & CJP-35/B three phase direct buried cable junction pedestal 200A 35kV special series are made with fire retardant fiberglass and protected with UV stabilized gel coat. Optional 200 35kV 2/3-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Both our three phase direct buried CJP-35/A & CJP-35/B cable junction pedestal 200A 35kV special series are available in the following configurations/options;
- Design – Direct Buried
- Heights – 41”, 50”, & 56″
- Top Depth – 32″
- Top Width – 62″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS parking stands above Junctions (35/A) or below junctions (35/B)
- Optional Junctions – (3) 2/3-Way 200A, 35kV
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
Specifications, Certifications & Literature ~ Cable Junctions Pedestals
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications: