CJPF-35B 15/25kV 200A
Both the CJPF-35/A & CJPF-35/B three phase pad mount cable junction pedestal are made with fire retardant fiberglass and protected with UV stabilized gel coat . Optional 200/600A 15/25 kV 2/3/4-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Discription
Our three phase pad mount CJPF-35/A & CJPF-35/B cable junction pedestals that come with (6) Adj SS parking stands either above (CJPF-35/A) or below (CJPF-35/B) are available in the following configurations/options;
-
-
- Heights – 30′ or 41”
- Top Depth – 32″
- Top Width – 62″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Safety – Reflective smooth white gel coat interior finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Parking Stands – (6) Adj SS parking stands above junctions (CJP-35/A) or below (CJP-35/B)
- Optional Junctions – (3) 2/3/4-Way 200/600A, 15/25kV,
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
-
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications:
Literature: