CJP-35S 15/25kV 600A
The CJP-35/S three phase direct buried cable junction pedestal is made with fire retardant fiberglass and protected with UV stabilized gelcoat . Optional 200/600A 15/25 kV 2/3/4-Way junctions are also offered. We certify that all cable junction pedestals conforms to IEEE C57-12-28 Pad mounted Enclosure Integrity Standard.
Our three phase direct buried CJP-35/S cable junction pedestal is available in the following configurations/options;
- Design – Direct Buried
- Heights – 41”, 50”, & 56”
- Top Depth – 32″
- Top Width – 62″
- Standard Colors – Willow Green (MG), Munsell Green (MG) or Light Gray (LG). Special colors are also available.
- Parking Stands – (8) Fixed SS Parking Stands – Slant Design
- Safety – Reflective Smooth White Gelcoat Interior Finish for stickers to adhere to.
- Lifting – Two lifting nuts located on both sides of the pedestals allowing it to be lifted the same way as a single phase transformer is slung.
- Optional Junctions – 2/3/4-Way 200/600A 15/25kV
- Optional Junction Clamps – (2) sets of Mounting plate & clips per phases
- Optional Ground Bar – #2 Solid Copper Bus Bar (-GB2), 3/8” Solid Copper Bus Bar (-GB38)
- Optional Ventilation Louvers – (2) SS Louvers W/ SS Screens, 5.1/4″ X 5.1/4″, one each Installed one each side of top
Specifications, Certifications & Literature ~ Cable Junctions Pedestals
Below are links to sample specifications & certifications for the pedestals along with product literature that can be downloaded. Please check back as we continue to add additional valuable information.
Specifications & Certifications: